Lowrance Elite 5 Sonar/GPS, Installation & Operation Manual

Page: 10 / 52

8
Trolling motor Skimmer and Pod Installation
The TMB-S trolling motor bracket (Part No. 51-45) is an optional accessory and is available through LEI
Extras at www.lei-extras.com . The TMB-S bracket is used to attach a one-piece bracket skimmer transducer
to a trolling motor. The Pod transducer does not need a TMB-S trolling motor bracket to be installed on a
trolling motor. It only needs a hose clamp (adjustable strap).
Installing transducer on trolling motor:
Using the components supplied with the TMB-S 1.
bracket attach the skimmer transducer to the
bracket as shown in the diagram.
Slide the adjustable strap (hose clamp) through
2.
the plastic bracket on the skimmer transducer or
through the Pod transducer slots and then slip
the strap around the trolling motor.
Position the transducer so its face is pointing straight down when the trolling motor is in
3.
the water.
Flat washer
Lock
nut
Bolt
Internal tooth
washer
Plastic bracket
The top of the Pod
transducer is curved to fit
the contour of the trolling
motor, so you do not
need a TMB-S mounting
bracket.
Position the transducer
to so its face is pointing
straight down when the
trolling motor is in the
water.
Installation