DSI Sonar
18
Installing transducer on trolling motor:
1. Place the DSI transducer inside the
trolling motor housing.
2. Slide the adjustable strap (hose clamp)
through the slots in the trolling motor
housing and slip the strap around the
trolling motor.
3. Position the trolling motor housing so its
face is pointing down when the trolling
motor is in the water.
4. Tighten the adjustable strap securely
to the trolling motor. Make sure there is
enough slack in the transducer cable for
the trolling motor to turn freely.
Slide the adjustable
strap through these slots.
0.TWEETY INSTALL_SONAR_DSI.indd 18
9/14/2011 11:55:43 PM
