DSI Sonar
17
Shoot-thru hull
The DSI transducer can be epoxied to the hull for
shoot-thru installations. This is not a recommended
installation method since it significantly degrades
DSI performance.
Mounting on trolling motor
The optional DSI trolling motor accessory (pn: 000-
10261-001) is available through LEI Extras at www.
lei-extras.com. The Trolling motor accessory allows
you to mount the DSI transducer to a trolling motor.
You must remove the factory installed transducer
mount from the transducer housing before you
can install the DSI transducer on a trolling motor.
3. Drill the mounting holes for the trans-
ducer bracket. Use a #29 bit (for the
#10 screws).
4. Attach the transducer to the transom
using the supplied screws (2).
Using a flathead screwdriver, depress the release
tab and slide off the transducer mount.
0.TWEETY INSTALL_SONAR_DSI.indd 17
9/14/2011 11:55:43 PM
