13
When using a heated breathing tube system,
the plug of the heating wire distributor cable
is connected using the yellow connector
(symbol
).
When using a special accessory temperature
probe, the temperature probe plug is
connected using the blue connector (symbol
). The temperature probe is a special
accessory and must be ordered separately.
The plug of the heated breathing tube
system is also color-marked (green) and
mechanically coded.
5.2 Installation /
Mounting the base unit
The prisma VENT AQUA device is equipped
with silicone feet and can be placed on a
flat, solid and level surface. Alternatively,
the device can be suspended with the rear
retaining tab in a suitable hook.
5.3 Installing the
humidification chamber
Unpack the humidification chamber with
automatic refill device (e.g., C200AF
universal) and check it before use for any
visible damage.
Closing caps
Connector
Attention:
Use only proper quality
humidification chambers!
Attention:
The operating instructions for the
respective humidification chamber must be
followed!
Pull off the colored caps, dispose of them
properly and connect the handle to the water
bag.