38
EN prisma
CHECK
WM
6819
0d 08/
2018
Result
The pulse oximetry sensor is connected. The display shows the
current oxygen saturation and pulse rate values.
4.4 Connecting the nurse call system and
remote alarm box
Connect the prisma VENT to the nurse call system of a hospital or
to the remote alarm box
VENTI
remote alarm
via the remote alarm
connection of the prisma CHECK module.
4.4.1 Connecting the remote alarm box VENTI
remote
alarm
Requirement
The module is connected to a prisma VENT therapy device.
1. Connect the plug of the connection line to the remote alarm
interface.
2. Connect the connection line to the remote alarm box
VENTI
remote alarm
or the nurse call system. When doing so,
observe the instructions for use for the remote alarm box or the
nurse call system connection line.
4.4.2 Forwarding alarms
All alarms are switched in parallel to a remote alarm connection.
The value under
SpO
2
displays the SpO
2
value in %. The value
under
PR
displays the pulse rate in pulse beats per minute. If the
values cannot be determined (e.g. because the sensor has not yet
been connected or if lack of signal quality makes the values
unreliable), - is displayed instead of the values.