Lowe 1200 Classic, Operator'S Manual

Page: 10 / 16

8
8
IX
UNIT PARTS DIAGRAMS
with SPEED & POWER RATINGS
MODEL 750C Classic
Operational Range:
Oil Flow 6 to 20 GPM (23 to 76 Lpm)
Pressure 2,000 to 3,300 PSI (13,790 to 22,737 Kpa)
Digging Conditions Light
Typical Auger Sizes 6” (15 cm), 9” (23 cm), 12” (30 cm), 15” (38 cm), and 18” (46 cm) diameter
Ref. # Part # Description
1 75-001CL Housing
2 75-002A Front cover
4 75-004 Rear cover
7 MEL-12K Hydraulic motor
8 10-008E 90º elbow (2 Required)
9 10-009 Hose nipple and clamp assembly
11 10-112 Universal connecting link (includes 10-013S)
12 10-013CL Clevis pin
13 10-013S Clevis pin
14 10-368A Bearing cone (2 required)
15 10-362A Bearing cup (2 required)
16 10-25028 Seal (2 required)
17 N-10 Nut for output shaft
18 W-10 Washer for output shaft
19 10-15 Key for output shaft
20 TR-507 Spacer for output shaft
21 CR255-13 Round output shaft with nut, lockwasher and key
HE255-13 Hex output shaft with nut, lockwasher, and key
22 11-60T Motor sprocket (includes 10-17W key)
22a 10-17W Key for motor shaft
23 26-60 Driven sprocket (includes key)
24 34-60H Drive chain
25 10-14CL Motor shaft spacer
C-60H Chain connecting link
L-78
7
/
8
” pin to attach auger to round (2
9
/
16
”) shaft drive unit
L-50
3
/
4
” pin to attach auger to hex (2”) shaft drive unit
SK-92 Seal kit for motor
MODEL 500CL
Operational Range:
Oil Flow 5 to 15 GPM (19 to 57 Lpm)
Pressure 1,700 to 3,300 PSI (11,720 to 22,737 Kpa)
Digging Conditions Light
Typical Auger Sizes 6” (15 cm), 9” (23 cm), 12” (30 cm), 15” (38 cm)
Ref. # Part # Description
1 75-001CL Housing
2 75-002A Front cover
4 75-004 Rear cover
7 MEL-12K Hydraulic motor
8 10-008E 90º elbow (2 Required)
9 10-009 Hose nipple and clamp assembly
11 10-112 Universal connecting link (includes 10-013S)
12 10-013CL Clevis pin
13 10-013S Clevis pin
14 10-368A Bearing cone (2 required)
15 10-362A Bearing cup (2 required)
16 10-25028 Seal (2 required)
17 N-10 Nut for output shaft
18 W-10 Washer for output shaft
19 10-15 Key for output shaft
20 TR-507 Spacer for output shaft
21 CR255-13 Round output shaft with nut, lockwasher and key
HE255-13 Hex output shaft with nut, lockwasher, and key
22 11-60T Motor sprocket (includes 10-17W key)
22a 10-17W Key for motor shaft
23 20-60 Driven sprocket (includes key)
24 30-60H Drive chain
25 10-14CL Motor shaft spacer
C-60H Chain connecting link
L-78
7
/
8
” pin to attach auger to round (2
9
/
16
”) shaft drive unit
L-50
3
/
4
” pin to attach auger to hex (2”) shaft drive unit
SK-92 Seal kit for motor
MODEL 500 Classic
Operational Range:
Oil Flow 5 to 15 GPM (19 to 57 Lpm)
Pressure 1,700 to 3,300 PSI (11,720 to 22,737 Kpa)
Digging Conditions Light
Typical Auger Sizes 6” (15 cm), 9” (23 cm), 12” (30 cm), 15” (38 cm)
Ref. #
Part # Description
1 75-001CL Housing
2 75-002A Front cover
3 75-004 Rear cover
4 MEL-12K Hydraulic motor
5 10-008E 90°elbow (2 Required)
6 10-009 Hose nipple and clamp assembly
7 10-112 Universal connecting link (Includes 10-013S)
8 10-013CL Clevis pin (Includes HANG-4)
9 10-013S Clevis pin (Includes HANG-4)
10 10-368A Bearing cone (2 Required)
11 10-362A Bearing cup (2 Required)
12 10-25028 Seal (2 Required)
13 N-12 Nut for motor shaft (Includes cotter key)
14 10-15 Key for output shaft
15 TR-507 Spacer for output shaft
16 CR255-13 Round output shaft
HE255-13 Hex output shaft
17 11-60T Motor sprocket (Includes 10-17W)
18 10-17W Key for motor shaft
19 20-60 Driven sprocket (Includes 10-15)
20 30-60H Drive chain
21 10-14 Motor shaft spacer
22 HANG-4 Lynch pin
23 N-10 Nut for output shaft
24 W-10 Lockwasher for output shaft
C-60H Chain connecting link
L-78 7/8” pin to attach auger to round (2 9/16”) shaft drive unit
L-50 1/2” pin to attach auger to hex (2”) shaft drive unit
SK-92 Seal kit for motor
MODEL 750 Classic
Operational Range:
Oil Flow 6 to 20 GPM (23 to 76 Lpm)
Pressure 2,000 to 3,300 PSI (13,790 to 22,737 Kpa)
Digging Conditions Light
Typical Auger Sizes 6” (15 cm), 9” (23 cm), 12” (30 cm), 15” (38 cm), and 18” (46 cm) diameter
Ref. #
Part # Description
1 75-001CL Housing
2 75-002A Front cover
3 75-004 Rear cover
4 MEL-12K Hydraulic motor
5 10-008E 90°elbow (2 Required)
6 10-009 Hose nipple and clamp assembly
7 10-112 Universal connecting link (Includes 10-013S)
8 10-013CL Clevis pin (Includes HANG-4)
9 10-013S Clevis pin (Includes HANG-4)
10 10-368A Bearing cone (2 Required)
11 10-362A Bearing cup (2 Required)
12 10-25028 Seal (2 Required)
13 N-12 Nut for motor shaft (Includes cotter key)
14 10-15 Key for output shaft
15 TR-507 Spacer for output shaft
16 CR255-13 Round output shaft
HE255-13 Hex output shaft
17 11-60T Motor sprocket (Includes 10-17W)
18 10-17W Key for motor shaft
19 26-60 Driven sprocket (Includes 10-15)
20 34-60H Drive chain
21 10-14 Motor shaft spacer
22 HANG-4 Lynch pin
23 N-10 Nut for output shaft
24 W-10 Lockwasher for output shaft
C-60H Chain connecting link
L-78 7/8” pin to attach auger to round (2 9/16”) shaft drive unit
L-50 1/2” pin to attach auger to hex (2”) shaft drive unit
SK-92 Seal kit for motor
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*