Step 26
Once the lower radiator hose assembly
has been removed, loosen the other 2
hose clamps.
Step 27
Disconnect the hoses from the water
inlet pipe. Inspect the water inlet pipe
and replace if needed. Click
see what is available from Low Range.
Note: It may be necessary to use some
of the Tech Tips shown earlier to remove
Step 29
This is what the lower hose assembly
should look like when ready for
installation.
Note: The two hose claps securing the
hoses to the water inlet pipe should be
tight with the other 2 hose clamps left
loose.
Step 28
Install the hose camps on the new
hoses as shown here.
Note: Be sure the new hoses are
positioned and oriented exactly as the
old ones were. (See Step 26 & 29)
