17
TurbiDirect_6 02/2019
2.3.4 Printing results
If a printer is installed and switched on, it is possible to print out the test results (without
saving before).
Press [F3] key.
The entire data set is printed with date, time, code-No. and
test result. Printing example:
2014-04-01 14:53:09
Test No.:1
Code-No.:1
2,13 NTU*
The Test No. is an internal number that is set automatically if
a test result is stored. It appears only at the print out.
The data set is stored with date, time, code-No. and test
result.
The display shows:
The test result is then shown again.
Note:
The display shows the number of free data sets.
If there are less than 30 data sets free the display shows:
Clear the memory as soon as possible (see chapter 2.4.4
Delete stored results). If memory capacity is used up it
would be impossible to save additional test results.
Stored!
Storage:
only 29 free records left
Storage: 900
free records left
F3
