11
GB
SET COMPONENTS
Pic. 1 – Set parts
a) Dust cover
b) Silicone massaging cushion
c) Plastic funnel
d) Breast pump body
e) Inner cap stopper
f) Silicone membrane
g) Handle holder
h) Handle
i) Bottle adapter
j) Valve body
k) Valve membrane
l) Bottle
m) Bottle stand
Pic. 2 – Milk storage kit
a) Hood/cup with scale
b) Screw cap
c) Teat
d) Sealing disc
3. Storing bag
4. „Discreet Elegance” Disposable Breast Pads– 6 pcs.
5. Spare parts
a) Valve membrane – 2 pcs.
CLEANING AND DISINFECTION INSTRUCTIONS
Before first and each next use disassemble the breast pump. Wash all components of breast pump and bottle in
warm water with mild detergent, then rinse thoroughly and disinfect in accordance to rules below.
Before first use, disinfect all components which come in contact with mother’s milk (silicone massaging cushion
(fig. 1b), breast pump body (fig. 1d), valve body (fig. 1j), valve membrane (fig. 1k), silicone membrane (fig. 1f), inner
cap stopper (fig. 1e), bottle adapter (fig. 1i), bottle (fig. 2l) by placing them for 5 minutes in boiling water, to ensure
hygiene.
NOTE!
Do not leave components on the bottom of the pot. Stir the water during disinfecting to prevent damage of
components.
•
Be sure that all components are completely submerged in boiling water during disinfection.
•
Do not boil
items that do not have direct contact with the mother’s milk.
•
Remove all components from water immediately after boiling.
Before subsequent use, disinfect all above mentioned elements of breast pump and bottle by pouring with boiling
water or placing in electric or microwave steam sterilizer, to ensure hygiene.
WARNING!
Do not disinfect, the funnel and the cap. Do not immerse them in water. Use a disinfectant for wiping.
After each disinfection, dry the parts thoroughly before assembling the pump and using it again. For drying you
can use a clean towel. Dried parts should be stored in an airtight container or a plastic bag.
WARNING!
Partially dry components may affect the operation of your breast pump. Make sure that all parts are
completely dry before use.
Washing instructions:
•
Always wash the product immediately after use to remove any residual milk.
•
Clean all components of the breast pump in accordance with the instructions mentioned above.
•
DO NOT use any solvents or chemicals to clean the product.
•
Rinse with clean, hot water.
•
If you use electric sterilizer for disinfecting elements please follow the instructions given by its manufacturer.
Summary of Contents for EXPERT
Page 20: ...20 NOTES ...
