CPLC-100
Page
12
VersaJet Console RS485 setup.
To set the VersaJet from RS232 to RS485/RS422 communcations jumber JR6 must be move
from the Right position to the Left position.
The 10 wire ribbon connector must be move from the right connector to the left connector.
Jumpers RS4 and RS5 are the terminator resistors, only the last unit in the chain must have
these jumpers on.
To setup PC computer see Loveshaw Net RS232 & RS485 Setup for VersaJet HR & SI
Systems and Window LCX Program. For additional information also see the VersaJet LC
Technical Manual.
