Loveshaw LITTLE DAVID CF5, Owner'S Manual

Page: 8 / 37

LOVESHAW
2. REINSERT BOX INTO THE MACHINE AND POSITION IT 1/2” BACK FROM THE MINOR FLAP FOLDER AT
THE EXIT END OF THE MACHINE. PUSH THE MINOR FLAP FOLDER FORWARD UNTIL IT JUST CONTACTS
THE BACK OF THE BOX. REMOVE THE BOX AND TIGHTEN THE MINOR FLAP FOLDER CLAMP.
MAJOR FLAP FOLDER PLATES (3):
THERE ARE TWO MAJOR FOLDER PLATES ON EACH SIDE OF THE MACHINE, ONE SMALLER AND ONE LARGER
THAT ARE ADJUSTED INDIVIDUALLY.
THE MAJOR FLAP FOLDING PLATES AND WHEELS MAY BE EXTENDED TO PROVIDE ADDITIONAL SUPPORT FOR
WIDE HEAVY BOXES OR RETRACTED FOR NARROW BOXES.
CAUTION:
DO NOT SET MAJOR FLAP FOLDING PLATES IN THE EXTENDED POSITION WHILE RUNNING VERY NARROW
BOXES. THIS WILL CAUSE THE MAJOR FLAP FOLDING WHEELS TO CONTACT THE MINOR FLAP FOLDING
ASSEMBLY AND WEDGE AGAINST THE BOTTOM CONTROL/FLAP OPENER BRACKET. IF FORCED, EITHER OF
THESE CONDITIONS CAN DAMAGE MACHINE COMPONENTS.