Loveshaw LD16AP, Owner'S Manual

Page: 22 / 39

LOVESHAW an
ITW COMPANY 21
9.
TAPE NOT BEING WIPED:
A.
CHECK MAIN SPRING.
B. TAPE TENSION IS SET TOO HIGH.
B. BOXES JAMMING IN MACHINE:
1.
JAM CLEARING PROCEDURE
:
A.
STOP MACHINE.
B. OPEN SAFETY GATES AND RAISE HEAD.
C. REMOVE BOX. RETHREAD AND CUT TAPE FLUSH WITH END OF THE ROLLER .
D. CLOSE SAFETY GATES.
E. PRESS “START” BUTTON.
2. INCORRECT BOX SIZE OR SHAPE:
A. CHECK BOXES TO MAKE SURE THE SIZE FALLS WITHIN THE MINIMUM / MAXIMUM
LIMITS OF THE MACHINE.
B. MACHINE WILL NOT PROCESS UNSTABLE BOXES.
3. CONTENTS BULGING THROUGH TOP OF BOX:
A. CHECK TO BE SURE THAT THE BOX IS NOT OVERFILLED WITH CONTENTS.
4. BOX SLIPPING AGAINST BELTS:
A. INCREASE THE DOWN PRESSURE BY ADJUSTING THE FRONT SUPPRESSOR.
5. HEAD PRESSURE TOO HIGH:
A. RAISE HEAD SLIGHTLY. ADJUST FRONT SUPPRESSOR HEIGHT.