KOMO
display and control panel
①
rechargeable battery
②
battery charging connector
③
electric motor
④
motor connector
⑤
PAS sensor
⑥
controller
⑦
FRAME INTEGRATED RECHARGEABLE BATTERY
The battery is secured by a key lock. The lock is on the right side of the frame. When
turning the key by 90° to the left you will release the battery. The key is designed only
for releasing the battery, which is essential for its removal.
If you want to remove the battery, first you need to release it by turning a key to the left
by 90° (see above). Pull the upper part of the battery up, then pull the whole battery
diagonally upwards in the direction of the frame pipe, it is placed on – this way you will
pull out the battery from the frame. You will plug the battery into the frame by positioning
it above its position, insert the bottom part into the frame and click the upper part to the
frame. Make sure the battery is inserted to the stop (push it), otherwise it may lead to
damage or theft.
There is a battery charging connector on the lower part of the battery with a rubber
plug. You can keep the battery on the frame while charging or remove the battery from
the frame.
