RANGE SELECTION SWITCH BANK (SW-4)
Turn ON the switch for the scale desired. All other switches should be OFF. If BIPOLAR OUTPUT
is selected, the scale will be from MINUS-SELECTION to PLUS-SELECTION (eg. -10 TO +10 VDC).
WARNING: Do not attempt to operate this device with the cover removed. Poten-
tially lethal voltage is present on some of the internal components. Do not open the
unit. There are no internal adjustments or user serviceable parts in the unit.
Mounting
Mount the unit in a panel that will not be subject to excessive temperature, shock, or vibration. All mod-
els are designed for mounting on an industry standard 35 mm DIN rail.
To install hold the SC4380 so that the front is higher than the rear. Place the upper slot on the rear of
the SC4380 on the top edge of the DIN rail. Slowly rotate the front down until the bottom spring clip snaps
over the bottom edge of the DIN rail.
OUTPUT
3
949-0527:Layout 3 3/25/10 8:44 AM Page 3
