Love Coffee Machines FUTURA PLUS 4U, Manual

Page: 6 / 27

34
User manual
3
Technical data
The technical data indicated in the table below
corresponds to the data plate located on the front
of the machine.
The data of the appliance can be seen also on the
label located on the package of the machine.
2Gr 3Gr
Power supply voltage V 230/400 240/415 230/400 240/415
Total power W 4.400 4.790 5.600 6.100
Power x group W 150x2 165x2 150x3 165x3
Coffee water tank heating element
power per group
W 1,000x2 1,090x2 1,000x3 1,090x3
Steam boiler power W 3.000 3.270 3.000 3.270
Steam boiler capacity lt / UK gal 8 / 1,76 8 / 1,76
Coffee water tank capacity lt / UK gal (1.2/ 0.26)x2 (1.2/ 0.26)x3
Width mm / in 800 / 31.5 1040 / 40.9
Depth mm / in 580 / 22.8 580 / 22.8
Height mm / in 590 / 23.2 590 / 23.2
Net weight kg / lb 95 / 209 117 / 257
Operating conditions °C / °F 5 ÷ 40 / 41 ÷ 104
2
Presentation
This product is manufactured in compliance with
EU Directives, Regulations and Standards indicated
in the EC Declaration of Conformity provided with
the machine.
The espresso coffee machine is strictly for profes-
sional use only. It is designed for the preparation of
hot drinks such as tea, cappuccinos and long, short
and espresso coffee, etc.
This device belongs to the family “Green Line”,
that is a range of products with low environmental
impact, able to reduce consumption.
The instructions for a proper use of the machine
are provided below.
!
The user must be sufficiently informed to oper-
ate the appliance correctly. It is recommended
not to carry out any operations on the ma-
chine which may modify or alter its operation.
WHEN THE MACHINE IS OPERATING, THE BOILER
CONTAINS STEAM AND HOT WATER UNDER PRES-
SURE.
!
The machine's installation and maintenance
operations can only be carried out by qualified
technical personnel.
Qualification can be provided by the builder
through participation in specific training courses.
!
The installation and maintenance of the machine
must be carried out only by qualified service per-
sonnel with knowledge and practical experience
of the machine itself, with particular attention to
the safety aspects and hygiene.