TO LOUROE AUDIO BASE STATION
OR OTHER AUDIO RECEIVING DEVICE
WIRING DIAGRAM FOR
MODEL TLI
SPEAKER/MICROPHONE
GREEN
(speaker
positive)
SAMPLE CABLE WEST PENN 356
+
2 Conductor shielded, 20 gauge with 22 gauge
drain (microphone connection)
+
2 Conductor unshielded, 18 gauge (speaker
connection)
West Penn 356 or equivalent
(all in the same jacket)
MOUNTING TLI TO VPSC HOUSING
Place TLI inside VPSC matching the 4 mounting screws
and secure with furnished nuts and washers.
No knockouts are provided on the VPSC. Bore a ¾”
opening at the desired side of VPSC for passing cable
through for connecting to TLI.
MICROPHONE
CONNECTIONS
WHITE SPEAKER WIRE (COMMON)
CONNECTS TO WHITE WIRE
(COMMON) USING WIRE NUT
1) Speaker Connection
White wire of West Penn 356
connects to White wire
(COMMON) from TLI
Transformer using a wire nut.
2) Green wire of West Penn 356
connects to Green wire from TLI
Transformer using a wire nut.
A B C
A
B
C
RED
BLACK
BARE
INSTALLATION AND OPERATING INSTRUCTIONS
Page 4 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
TLI_inst_4/11
