ENG
LISH
14
Installation:
Door Handles
• Remove the two (2) screws from each handle.
• Insert the Phillips screw through the back of each of the 4
cabinet doors, slide the bezel onto the screw, and then line
up the handle. Secure in place.
Twist Lock Handles
• Remove hardware from the door locking assembly.
• Insert handle through the front of each cabinet door.
• Re-secure the mounting hardware from the inside of the
cabinet door.
12
INSTALL THE UPPER CABINET TO MAIN CABINET
Parts required:
1 x Upper Cabinet
1 x Rear Heat Panel
12 x Phillips screws (D)
12 x Spring washers (F)
12 x Washers (G)
Installation:
• Carefully lift the upper cabinet from your working surface
and place onto the top of the main cabinet.
• From inside the main cabinet, use a Phillips Screwdriver, to
install the twelve (12) screws, spring washers and washers
needed.
- There is one in each of the four (4) corners, and two (2)
additional ones on each of the four sides.
13
INSTALL THE SIDE SHELF
Parts required:
1 x Side Shelf - 25.4 cm (10 in.) Long Chrome Hanger Bar w/screws
4 x Side Shelf - Tool Hanger w/nuts
1 x Side Shelf Top
1 x Bottle Opener
6 x Phillips Screws (D)
6 x Spring Washers (F)
6 x Washers (G)
Installation:
Step 1 Tool Hangers
• Remove the nuts from all four (4) tool hangers.
• Insert individual tool hanger into the four (4) holes
provided in the side shelf top.
• Hand tighten each nut, then tighten to a snug, secure fit,
using a wrench.
Step 2 Chrome Hanger Bar
• Remove the two (2) screws from the bar hanger.
