background image

1. Do not place or store product where it can fall or be pulled into a tub or sink.
2. Do not place in or drop into water or other liquid.
3. Do not reach for a product that has fallen into water. 

If this happens unplug the unit and then remove item from water immediately.

READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE

DANGER- To reduce the risk of electrocution:

WARNING- To reduce the risk of burns, electrocution, fire, or injury to persons.

1. Close supervision is necessary when this product is used by, on, or near children or invalids.

2. Use this product only for its intended use as described in this manual. 

Do not use attachments not recommended by the manufacturer.

3. Never operate this product if it has a damaged cord or plug or if it is not working properly, 

if it has been dropped or damaged, or dropped into water. Return the product to a service center for 
examination and repair.

4. Keep the cord away from heated surfaces.

6. Do not use the unit if you are sleeping or tired to the point of being drowsy. 

7. Never drop or insert any object into any opening or hose. 

9. Unplug this product before filling. Fill (reservoir) with water. Do not overfill (or specify filling instructions)

SAVE THESE INSTRUCTIONS

This product has to be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by  

  

providing an escape wire for the electric current. This product  is equipped with a cord having a grounding wire with a 
grounding plug. The plug must be plugged into an outlet that is  properly installed and grounded.

Danger

 - Improper use of the grounding plug can result in a risk of electric shock.

If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. 
Consult with a licensed electrician if you have concerns about whether the product is properly grounded. 

This product is for use on a normal 120 V circuit, and has a grounding plug that looks like the plug illustrated in sketch A 

in Figure 1. A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used to connect this  
plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter  
should be plugged into a properly grounded outlet (sketch A) and should be installed by a licensed electrician. 
The green colored rigid ear, lug, and the ike extending from the adapter must be connected to a permanent ground such 
as a properly grounded outlet box cover. 
Whenever the adapter is used, it must be held in place by the screw.

This appliance has to be grounded.

GROUND INSTRUCTIONS

5

4

IMPORTANT SAFEGUARDS

IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK.
Electric wiring has to be done in accordance with all local codes, 
or in the absence of local codes, with National Electrical Codes.

Preferred Connection

Temporary Connection

WARNING

DANGER

GROUNDING PIN

ADAPTER

ADAPTER

METAL SCREW

TAB for
Grounding Screw

GROUNDED
OUTLET

- Figure 1-

The use of an extension cord is not recommended or advised. If it is necessary to use an extension cord, use only  
a three-prong extension cord (one to one), and a three slot built-in GFCI receptacle that will accept the plug on this
product. The marked rating of the extension cord should be equal to or greater than the electrical rating of the unit
(10amp). Consult a licensed electrician if you are not sure whether the unit is properly grounded.

Instruction and caution statements for cleaning, user maintenance, operations recommended by the manufacturer,
such as lubrication or non lubrication, and a warning to the user that any other servicing should be performed by 
an authorized service representative or that the product has no user serviceable parts. 

GROUNDED
OUTLET BOX

WIRING REQUIREMENT

REMARK

1

5. Never block the air openings of the product or place it on a soft surface, such as a bed or couch, 

where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.

8. Do not use outdoors or operate where aerosol (spray) products are being used or when oxidized

products are being administered. 

Cautions Before Installation

2

THIS PRODUCT MUST BE PLUGGED into a regular voltage Grounded GFCI outlet (North America 120V ac, 60Hz / Europe 
220-240V~ , 50/60Hz). The rated power consumption is 660W /  600-700W. In locations where only a standard 
two-prong outlet is available, it is the responsibility of the user to install a grounded three-prong outlet. Using higher 
voltage is dangerous and may result in a fire or other accident. Lotus Hygiene Systems Inc., is not responsible for 
damage resulting from the use of it on other than specified voltage, or operating it without proper grounding. 

This Product must be on a separated circuit. No other appliance should 
share the circuit with this product. Sharing a circuit could cause the 
branch circuit fuse to blow or the circuit breaker to trip. Continuous 
usage under these conditions may result in fire or property damage.

Summary of Contents for ATS-800













Reviews: