©Copyright Lotronic 2017
3
ON/OFF
Slide the ON/OFF switch (17) to put the speaker either into active or into sleep mode. In active mode, all functions are available.
In Sleep mode, only the alarm/clock is running and the battery consumption is very low.
Please note:
Don’t slide the ON/OFF switch too quickly. Wait at least 2 seconds after each slide.
Automatic Sleep Mode
Press the Sleep button (4) to choose between 10, 20 or 30 minutes as countdown. Once the duration has been chosen, the
countdown will start after 3 seconds and the blue indicator (3) lights up.
Clock setting
Keep the Clock Set button (6) pressed in until the hours flash on the display. Press buttons (15) or (14) to set the displayed hours
and minutes. Press the Play/Pause/Pick up button (16) to switch to hours or minutes setting.
Short press on Clock Set (6) to save and quit the setting mode.
Alarm setting
Keep the Alarm Set button (2) pressed in until the hours flash on the display. Press buttons (15) or (14) to set the displayed hours
and minutes. Press the Play/Pause/Pick up button (16) to switch to hours or minutes setting.
Short press on Alarm Set (2) to save and quit the setting mode. The alarm function is now activated. Press the Alarm On button
(5) to turn the alarm on and off.
Speaker Mode Selection
Press the Mode button (13) to cycle through the different modes: Bluetooth, TF card music, Line in, FM tuner, standby mode.
If no TF card is inserted, TF mode will not appear in the list.
Bluetooth Mode
Press Mode button (13) and select Bluetooth mode. The speaker will be ready for pairing and the display shows “blue”. Activate
the Bluetooth function on your device and search for the speaker. Select “BT-WAKEUP”. The units will connect and the speaker
says “Bluetooth is connected”.
Volume up: Long press on
+ (15)
Volume down: Long press on
- (14)
Last song: Short press on
- (14)
Next song: Short press on
+ (15)
Play/pause: Short press on
(16)
Note:
(1) When the same Bluetooth device is used again, the speaker will connect automatically to i. A new Bluetooth connection can’t
be established if the last connection has not been cut off.
(2) If the Bluetooth connection can’t be established, remove the Bluetooth name from your phone and reboot the speaker by
turning it off and on via the
Power switch (1)
.
Bluetooth Hands free Call
In Bluetooth mode, the speaker will display the calling number. Press
to answer the call. Speak close to the microphone to
get a better voice quality.
TF Card Music Mode
Insert a TF card with music. Press the MODE button to select TF card Music Mode. The speaker will play the files on the TF card in
the sequence that they have been stored.
Volume up: Long press on
+ (15)
Volume down: Long press on
- (14)
Last song: Short press on
- (14)
Next song: Short press on
+ (15)
Play/pause: Short press on
(16)
LINE IN Mode
Press MODE button and select “Line In Mode”. Connect the speaker to an audio source via the supplied 3.5mm audio lead.
Volume up: Long press on
+ (15)
Volume down: Long press on
- (14)
