®
Lotos Technology CT520D
Quick Setup
Power plug wiring:
For either 110 or 220VAC, the GREEN wire is the ground wire. The WHITE and BLACK wires are hot
wires.
For Plasma Cutting:
1. Wear a Lotos auto darkening plasma cutting helmet
(Figure 1.1, not included in the box. To purchase, please
go to our website.) to protect your eyes from harmful
plasma cutting arc radiation and safety gloves to protect
your hands during welding.
2. Connect the machine gas inlet (on the back of the machine, Figure 1.2) with an air compressor
(Figure 1.3) and set the air pressure to 65-70 PSI. (The Air Regulator is optional if your air
compressor has the capability to control output air pressure.)
1
Instructions
Figure 1.1
Figure 1.2
Figure 1.3
65 - 70 PSI
Power
Cord
Gas
Inlet
