INSTALLATION OF RECEIVER
CONNECTING A RECEIVER TO A T.V. USING COAXIAL CABLES
Ensure the Power Switch on the Receiver is turned OFF prior to
proceeding with the following steps.
NOTE
Ensure that the sender and receiver are set to the same channels.
NOTE
STEP 2:
1. Place the wireless receiver near your television (or monitor).
2. Connect one end of the coaxial cable to the back of the Receiver. Plug the other
end of the coaxial cable to the television.
3. Connect one end of the supplied 9V 500 mA AC Adapter into the back of the
receiver; the other end into an electrical outlet. Turn the receiver ON. The system
is defaulted to channel 1.
4. Search channels 1 through 4 by using Channel Selector Switch on the Receiver
and Sender.
5. Turn your T.V. to channel 3 to view the picture from your second T.V.
6. Adjust the antenna on both the sender and receiver as necessary for
optimum viewing.
9
Ensure the Power Switch on the Receiver is turned OFF before
proceeding with the following steps.
Ensure that the sender and receiver are set to the same channels.
NOTE
INSTALLATION OF RECEIVER
CONNECTING A RECEIVER TO A REMOTE TV THROUGH A VCR
10
NOTE
1. Connect one end of the RCA cables to the Audio/Video jacks located at the back
of the receiver. Plug the other end of the RCA cables into the Audio/Video In
jacks on your VCR.
2. Connect one end of other RCA cables to the Audio/Video jacks on your Television.
Plug the other end of the RCA cables into the Audio/Video Out jacks on your VCR.
3. Turn both the Sender and Receiver ‘ON’. Set your TV to Video mode to view
the signal from the T.V. Ensure to select A/V channel on the VCR. (consult your
T.V./VCR owners manual on setting to Video (Aux) mode).
4. Turn your T.V. to AV (Aux. Mode) to view the picture on your second T.V.
5. Adjust the antenna direction on both the sender and receiver as necessary for
optimum viewing.
B)
(
SUPPLIED
)
