Lorex VS6367 Operating Instructions Manual Download Page 5

1. Connect one end of the RCA cables to the Audio/Video jacks of the 

Sender; the other end to the Audio/Video Out jacks of the VCR/Satellite/DVD.  
Ensure that the yellow, red and white plugs match the yellow, red and white jacks
on both the VCR/Satellite/DVD and the Sender.  

2. Plug one end of the supplied AC Adapter (9V 500 mA adapter) into the back of 

the sender; the other end into an electrical outlet.  The system is defaulted to 
channel 1.  Turn the sender on and ensure that the sender and receiver are set
to the same channels.

Ensure the Power Switch on the Sender is turned OFF prior to
proceeding with the following steps.

INSTALLATION OF SENDER

CONNECTING A TRANSMITTER SIGNAL FROM YOUR 
VCR/SATELLITE/DVD

NOTE

STEP 1:

7

CONNECTING A RECEIVER TO A T.V. USING RCA CABLES

You have two options to connect the Receiver:  A) Using RCA Cables (see
below; or B) Using Coaxial Cables, please refer to page 9 of this manual.

Ensure the Power Switch on the Receiver is turned OFF prior to 
proceeding with the following steps.

NOTE

1. Place the wireless receiver near your television (or monitor).

2. Connect one end of the RCA cables to the Audio/Video jacks at the back

of the Receiver.  Plug the other end of the RCA cables into the Audio/Video
In jacks on your television.  Be sure the yellow, red and white plugs match
the yellow, red and white jacks on both the receiver and TV.

3. Connect one end of the supplied 9V 500 mA AC Adapter into the back of  

the receiver; the other end into an electrical outlet.  Turn the receiver ON.  
The system is defaulted to channel 1.  Ensure to select A/V channel on the VCR. 
(refer to your T.V./VCR owners manual on setting to Video (Aux) mode).

4. Turn your T.V. to AV (Aux. Mode) to view the picture on your second T.V. 

5. Adjust the antenna on both the sender and receiver as necessary for

optimum viewing. 

Ensure that the sender and receiver are set to the same channels.

NOTE

STEP 2:

8

INSTALLATION OF RECEIVER

A)

NOTE

TO UTILIZE YOUR REMOTE CONTROL, PLEASE SEE 
PAGE 11 “USING THE IR EXTENDER FEATURE WITH 
YOUR REMOTE CONTROL”.

VCR/SATELLITE/DVD

(

SUPPLIED

)

(NOT SUPPLIED)

(SUPPLIED)

Summary of Contents for VS6367









Reviews: