background image

vi

 

Installation (Continued)

10. 

Ventilation

 - Slots and openings in the case are 

provided for ventilation to ensure reliable operation of 
the product and to protect it from overheating. These 
openings must not be blocked or covered. The 
openings should never be blocked by placing the 
product on a bed, sofa, rug, or other similar surface. 
This  product  should  never  be  placed  near  or  over  a 
radiator or heat register. This product should not be 
placed in a built-in installation such as a bookcase or 
rack unless proper ventilation is provided and the 
product manufacturer’s instructions have been 
followed.

11. 

Attachments

 - Do not use attachments unless 

recommended by the product manufacturer as they 
may cause a hazard.

12. 

Water and Moisture

 - Do not use this product near 

water — for example, near a bath tub, wash bowl, 
kitchen sink or laundry tub, in a wet basement, near a 
swimming pool and the like. 

13. 

Heat

 - The product should be situated away from heat 

sources such as radiators, heat registers, stoves, or 
other products (including amplifiers) that produce 
heat.

14. 

Accessories

 - Do not place this 

product on an unstable cart, 
stand, tripod, or table. The product 
may fall, causing serious damage 
to the product. Use this product 
only with a cart, stand, tripod, 
bracket, or table recommended by 
the manufacturer or sold with the 
product. Any mounting of the 
product should follow the manufacturer’s instructions 
and use a mounting accessory recommended by the 
manufacturer.

15. 

Camera Extension Cables

 – Check the rating of 

your extension cable(s) to verify compliance with your 
local authority regulations prior to installation.

16. 

Mounting

 - The cameras provided with this system 

should be mounted only as instructed in this guide or 
the instructions that came with your cameras, using 
the provided mounting brackets.

17. 

Camera Installation

- Cameras are not intended for 

submersion in water. Not all cameras can be installed 
outdoors. Check your camera environmental rating to 
confirm if they can be installed outdoors. When 
installing cameras outdoors, installation in a sheltered 
area is required. 

Service

1. 

Servicing

 - Do not attempt to service this product 

yourself, as opening or removing covers may expose 
you to dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel.

2. 

Conditions Requiring Service

 - Unplug this product 

from the wall outlet and refer servicing to qualified 
service personnel under the following conditions:

A. When the power supply cord or plug is damaged.

B. If liquid has been spilled or objects have fallen into 
the product.

C. If the product has been exposed to rain or water.

D. If the product has been dropped or the cabinet has 
been damaged.

E. If the product does not operate normally by 
following the operating instructions. Adjust only those 
controls that are covered by the operating 
instructions. Improper adjustment of other controls 
may result in damage and will often require extensive 
work by a qualified technician to restore the product 
to its normal operation.

F. When the product exhibits a distinct change in 
performance. This indicates a need for service.

7. 

Replacement Parts

 - When replacement parts are 

required, have the service technician verify that the 
replacements used have the same safety 
characteristics as the original parts. Use of 
replacements specified by the product manufacturer 
can prevent fire, electric shock, or other hazards.

8. 

Safety Check

 - Upon completion of any service or 

repairs to this product, ask the service technician to 
perform safety checks recommended by the 
manufacturer to determine that the product is in safe 
operating condition.

Use

1. 

Cleaning

 - Unplug the product from the wall outlet 

before cleaning. Do not use liquid cleaners or aerosol 
cleaners. Use a damp cloth for cleaning.

2. 

Product and Cart Combination

 - When product is 

installed on a cart, product and cart combination 
should be moved with care. Quick stops, excessive 
force, and uneven surfaces may cause the product and 
cart combination to overturn.

3. 

Object and Liquid Entry

 - Never push objects of any 

kind into this product through openings as they may 
touch dangerous voltage points or “short-out” parts 
that could result in a fire or electric shock. Never spill 
liquid of any kind on the product.

4. 

Lightning

 - For added protection of this product 

during a lightning storm, or when it is left unattended 
and unused for long periods of time, unplug it from 
the wall outlet and disconnect the antenna or cable 
system. This will prevent damage to the product due 
to lightning and power line surges.

Summary of Contents for Vantage L27LE10B

























Reviews: