7
Using the VESA Mount Holes
6. Using the VESA Mount Holes
This monitor features mounting holes for a 100mm x 100mm VESA mount and an independent
stand. This allows you to mount a Lorex VESA-mountable DVR to the back of the monitor or to
mount the monitor to a wall or ceiling using a compatible mounting bracket (not included).
VESA mount holes
NOTE:
VESA mounting bracket and VESA mount screws are not included with the monitor.
If you purchase a separate mounting bracket for wall or ceiling mounting, check
the documentation for your mounting bracket for installation instructions.
To mount your DVR to the back of the monitor using the VESA mount holes:
1
Disconnect all cables from the DVR
and monitor.
VESA mount
screws inserted
2
Insert the VESA mount screws into the
two top VESA mount holes on the
monitor. Make sure the screws are
only 3/4 of the way in; this will allow
sufficient clearance to hang the DVR.
3
With the front panel of the DVR facing
up, align two of the VESA mount holes
on the DVR and slide down into place.
Example of VESA mount
holes on Edge Series DVR
DVR mounted to
monitor