CHAPTER TABLE OF CONTENTS PAGE
1. CONTROLS AND FUNCTIONS
WIRELESS CCD CAMERA...........................................................5
WIRELESS MONITOR.....………………...........................................6
2. INSTALLATION
WIRELESS CAMERA.................................................................…8
WIRELESS MONITOR......................……………….......................…9
ADJUSTING THE A/V ANTENNA..........................................….. 10
3. SYSTEM OPERATION
OPERATION WITH MONITOR.....................................................11
OPERATION WITH MONITOR & VCR..........................................12
4. MULTIPLE CHANNEL OPERATION
ONE RECEIVER MONITOR BY TWO CAMERAS OPERATION......13
ONE CAMERA BY TWO RECEIVERS OPERATION.............…......15
5. TROUBLE SHOOTING ...............................................................16
6. BASIC SYSTEM INCLUDES.....................................................…16
7.SPECIFICATIONS.....................................................................…17
13
4
4.MULTIPLE CHA N N EL O P E R ATION
ONE RECEIVER MONITOR BY TWO CAMERAS OPERATION
1.Place all cameras at your desired location.
2.Connect the Receiver Monitor with or without VCR using RCA cables.
(see instructions on page 12)
3.Turn on all Cameras. The Cameras must use different channel. Select the channel
1-2 by using Channel Selector Switch on each Camera unit.
Second Camera is not included.
NOTE
Be sure to set the Power Switches on the Camera and the Receiver
Monitor to the OFF position before proceed following steps.
NOTE
Cameras
Ch1
Ch2
Channel Selector
Switch
Receiver Monitor
This wireless Camera & Monitor System consists of a Wireless Camera
and a 5" B/W Monitor. You can connect up to two Cameras to the
monitor.
For proper usage and application, please read the instruction manual.
Channel Selector
Switch
