background image

2

 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE 

OF PLUG TO WIDE SLOT, FULLY INSERT.

Thank you for purchasing the Lorex 5” Black & White Rear View Safety System. This 
system helps to prevent backing-up and parking accidents by allowing you to view or 
check on the traffic behind your vehicle, or when rounding corners (blind spot 
prevention).

This system is suitable for waste trucks, RV campers, vans, delivery vehicles & 
cars.To learn more about this system or to find out more about our products available, 
please visit our website at: 

http://www.lorexcctv.com

Note

: Includes the MO453 monitor & CA453 camera

Warning

: This Rear Observation System is to be used with, not instead of, other 

viewing aids in your vehicle such as front, rear, and side mirrors. Safe driving 

practices, alertness, and visual and physical fitness are prerequisites for your driving 
safety. The Manufacturer shall not be held liable for any accidents which may occur 

while operating this system.

Summary of Contents for RV453

















Reviews: