Lorex N882 Series User Manual Download Page 70

Page: 70 / 122

Using the Main Menu

The following alarms are shown in the Alarm Status menu:

•

No HDD:

No hard drive is detected.

•

HDD Error:

Hard drive error detected.

•

Disk Full:

Hard drive is full.

•

IP Conflict:

More than one device on the network is using the same IP address.

•

Net Disconnect:

System is not connected to the network.

•

MAC Conflict:

More than one device on the network is using the same MAC address.

•

Video Loss:

Shows disconnected channels.

•

Motion Detect:

Shows channels with active motion alarms.

To access the event information menu:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

, then click

EVENT

16.3.6 Online Users

View all users connected to the system using computers or mobile devices.

#LX400117; r. 6.0/57895/57895; en-US

Summary of Contents for N882 Series



























































































































Search results

Summary of Contents for N882 Series

Reviews:

Related manuals for N882 Series

Brands by name

Popular brands

Lorex N882 Series, User Manual

Search results

Summary of Contents for N882 Series

Reviews:

Related manuals for N882 Series

Brands by name

Popular brands