Lorex N861 Series, User Manual, Page: 95 / 138

Using the Main Menu 16
2. Click , then click EVENT . Click the LOCAL ALARM tab on the side panel.
3. Select the alarm input port the device is connected to.
4. Check
Enable .
5. Select
NO (Normal Open)
or
NC (Normal Close)
depending on the type of alarm input de-
vice you have.
6. Click Setup next to Schedule to configure the times of the week when the selected device will
be activated. By default, the device will be activated 24/7.
• Click or click-and-drag along each of the red timelines to quickly add or remove time from
each day’s schedule in 30–minute segments.
• Click beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click Set . This will allow you to set exact start and
end times for a schedule.
• Click OK when finished.
#LX400113; r. 2.0/56306/56316; en-US 87