www.lorexcctv.com
LW2100 SERIES Series Quick Start Guide_R1
Page 2
Digital Wireless
Analog Wireless
2.4 GHz Digital
2.4 GHz Analog
Secure privacy ensured
Non Secure, no privacy
Interference
FREE
Interference from
Range up to 450 ft line of sight
Up to 300 ft line of sight
Pairing - hand shake between camera and receiver
No Pairing - fixed channel allocation
FHSS - Frequency Hopping Spread Spectrum Technology
N/A
Supports 2 resolutions
VGA:
640 x 480
QVGA:
320 x 240
Supports only one resolution
Digital PTZ (Pan/Tilt/Zoom)
N/A
Signal strength Indicator
N/A
NOTE:
Decide whether the camera will be permanently wall
mounted or placed on a tabletop:
• If you decide to place the camera on a tabletop or other flat
surface (ensure to secure the camera with proper screws,
thereby preventing it from falling down and damaging the lens
and surface) the camera can easily be moved to different
locations as desired. (Using this option will allow you to use
the Battery adaptor, which provides flexibility by moving the
camera from room to room).
• If you decide to permanently mount the camera to a wall, make
sure to select a location close to a power outlet.
Did you know?
1. Connect camera to the Battery Adaptor.
You can move your camera around from one room to another with the use of the included
battery adaptor.
2
3
1
C.
Receiver Function Buttons
Press the Left, Right, Up, Down buttons to navigate
in Menu Mode. Use these buttons to Pan/Tilt the
image in ZOOM Mode (QVGA Mode Only).
Press the M to enter or exit Menu Mode.
Press the ZOOM Button to Zoom In
(QVGA) or Zoom Out (VGA).
Press the CAM Button to switch to a
different Camera on the Receiver
About Digital Wireless
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorexcctv.com/support
COLOR DIGITAL WIRELESS SURVEILLANCE SYSTEM
WITH INDOOR/OUTDOOR NIGHT VISION CAMERA
LW2100 SERIES - QUICk START GUIDE
WiFi
Bluetooth
Microwave
Cordless Phone
DIGITAL WIRELESS
The table above shows that Digital Wireless Technology offers many advantages over Analog wireless. When comparing a Digital Wireless solution to a wired solution,
it is important to be aware of the bandwidth limitations. Due to bandwidth constraints and depending on the signal strength the frame rate, which is measured in FPS
(Frames per Second) may be reduced. For example, a Digital Wireless camera in the highest resolution (VGA 640x480) will feature a lower frame rate compared to a
wired solution which provides 30 FPS. It is possible to achieve 30 FPS with Digital Wireless by using the lower resolution (QVGA 320x240). For specific Frame Rate
details, please refer to the Viewing Modes section in the User Manual.
WiFi
Bluetooth
Microwave
Cordless Phone
ANALOG WIRELESS
2. Slide open the Battery Adaptor Case to add batteries (not included).
3. Insert 4 x AA Batteries into the Battery Pack. Make sure to correctly
line up the Positive (+) and Negative (-) terminals of the batteries.
4. Slide the Battery Pack cover back on.
5. NOTE: It is recommended to remove the battery pack from the
camera when not in use.
©2008 Lorex Technology Inc.
As our product is subject to continuous improvement, Lorex Technology & subsidiaries reserve the right to modify product design, specifications & prices
without notice and without incurring any obligation. E&OE
LW2100 Series_QSG_EN_R1.indd 2
5/6/2008 5:05:35 PM
