Lorex L404 Instruction Manual Download Page 21

Page: 21 / 78

+2137438 45 ,-+/+.

Display Set

Set Display Sequence

FULL DISPLAY SEQUENCE

: Set the length of time each camera is displayed in cycling Full

Screen Display mode:

•

PAGE

: Displays up to 8 camera configurations per page (second page only available for 16

camera setups). To change the page, press the

and

buttons to highlight, and press the

SEL

button to change to Page 2.

•

CAMERA 1 - CAMERA #:

Set the length of time that a Camera is displayed in Sequence

Mode. To change the camera setting, press the

and

buttons to highlight, and use the

and

buttons on the front of the DVR to change the length of time a Camera is displayed.

Options include 5, 10, 15, 30, 45, 60 (in seconds) and Bypass.

•

SAVE & EXIT

: Saves any changes made, and exits to the Main Menu. Press the

and

buttons to highlight, and press the

SEL

button to accept the changes.

QUAD DISPLAY SEQUENCE

: Set the length of time each QUAD of cameras (4 cameras per

page) is displayed in cycling QUAD Display mode:

•

PAGE # SEQ

: Set the length of time that a QUAD of Cameras is displayed in Sequence. To

change the Page setting, press the

and

buttons to highlight. Page 1 (Cameras 1-4),

Page 2 (Cameras 5-8) etc. Use the

and

buttons on the front of the DVR to change the

length of time a Quad is displayed. Options include 5, 10, 15, 30, 45, 60 (in seconds) and
Bypass.

•

SAVE & EXIT

: Saves any changes made, and exits to the Main Menu. Press the

and

buttons to highlight, and press the

SEL

button to accept the changes.

START FULL DISPLAY SEQUENCE

: Starts viewing Cameras in Full Screen Display Sequence

Mode (based on the settings configured in the

FULL DISPLAY SEQUENCE

menu).

START QUAD DISPLAY SEQUENCE

: Starts viewing Cameras in QUAD Display Sequence

Mode (based on the settings configured in the

QUAD DISPLAY SEQUENCE

menu).

Event Clear

Clears the listing of Previously Recorded Events on the DVR Hard Drive.

Summary of Contents for L404














































































Search results

Summary of Contents for L404

Reviews:

Brands by name

Popular brands

Lorex L404, Instruction Manual

Search results

Summary of Contents for L404

Reviews:

Brands by name

Popular brands