22
data transmission, can be set to OFF, 2400, 4800, 9600, or
19200.
(iii)
PASSWORD SET :
If you select [Y], you will need to input a
password when you enter the Main Menu. Use to change your
password for accessing the Menu. The password must be 4
digits. The default Password is “0000”.
Selecting [N] will allow you into the menu without a password.
(iv) NETWORK (TCP/IP):
The User can set the network for OFF,
DYNAMIC IP or STATIC IP. The default value is
“DYNAMIC IP”.
(v) USER ID/PASSWORD:
The User can set a password for the
Master ID and account. The Master ID should be 5 digits in
English, and the Password should be a 5 digit alphanumeric
combination.
Default value -
ADMIN / ADMIN.
(vi) GUEST PASSWORD:
The User can set a password for the
GUEST account. Maximum 5 digits.
Default value - GUEST.
NOTE
The Master User has full access to all the functions on the Network but
the Guest User has limited access to the functions. The GUEST can see
only cameras.
(vii) IP ADDR
:
Enter the DVR IP address.
Default value – 192. 168. 001. 150
(viii) SUBNET :
Enter the Subnet Mask.
Default value - 255.255. 255. 000
(ix) GATEWAY
:
Enter the Default Gateway.
Default value – 192. 168. 001. 001
(x) PORT :
Enter the Default port.
Default value – 5000
8.
HDD / REC SET
-
This sub-menu allows you to set the Record parameters for
your Hard Disk Drive.
NOTE
NETWORK CONFIGURATION (Part of SYSTEM SET (ll))