Q:
Why is the ‘Alarm’ LED illuminated?
A:
This LED will be ON during normal operation to indicate that the alarm input(s) are enabled. To disable the alarm inputs if not being used,
perform the following steps: On the DGR100, go into the Menu>Alarms and set ‘Alarm Enable’ to NO.
Q:
Is the DGR100 Multiplexer compatible?
A:
Yes the unit is compatible with most multiplexers. Please refer to the Multiplexer compatibility chart for a list of approved models.
Q:
Is the DGR100 compatible with an analog video switcher?
A:
Currently this is not supported. As the video switches between cameras, a ‘video loss’ will occur on each switch. This will cause
the buzzer to sound and lead to problems with recording.