5. Configure the following:
• To add a single IP address to the selected filter type, enter it into
Start Address
, then click
Add IP Address
.
• To add a range of IP addresses to the selected filter type, enter the
Start Address
and
End
Address
, then click
Add IP Section
.
6. Click
Apply
.
14.7.5 Save System Settings to a USB Flash Drive
The system allows you to save your current system configuration to a USB flash drive (not in-
cluded). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
Prerequisite:
• Connect a USB flash drive (not included) to a free USB port on the unit.
To save system settings:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
SYSTEM
, then click the
CONFIG BACKUP
tab.
3. Under
Device Model
, select the USB device where you would like to save the configuration.
4. Click
Export
to save your current system configuration.
14.7.6 Import System Settings from a USB Flash Drive
If you have backed up your system configuration, you can import it to apply all your saved menu
settings.
Prerequisite:
• Connect a USB flash drive (not included) to a free USB port on the unit with an exported sys-
tem configuration (see 14.7.5
Save System Settings to a USB Flash Drive
, page 68 for full
details).
To import system settings:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
#LX400111; r. 2.0/56089/56100; en-US
68
