Wiring the chime
6
You must determine the type of doorbell chime you have in your home:
electronic
or
mechanical
.
Not sure?
If your doorbell chime is a classic
*ding-dong*
sound, chances are your chime is mechanical.
If your doorbell sounds more like a melody, then your chime is electronic. If you are still not sure, remove
the cover panel of your chime box - if you find springloaded levers and a physical metal chime, you have a
mechanical chime.
For users with a mechanical chime, follow the extra step below to complete the installation.
1.
Remove the cover panel of your doorbell
chime box.
2.
Loosen the screws labeled
FRONT
and
TRANS
using a Philips head screwdriver. Do
not remove the screws, and be sure to detach
any connected wiring (see
Figure 1
).
3.
Connect the included chime kit to the green
terminal on the end of the included wire
harness (see
Figure 2
).
For mechanical chime owners:
Figure 1
Figure 2
B451AJ_QSG_EN_R1.indd 9
B451AJ_QSG_EN_R1.indd 9
2020-11-03 11:42:46 AM
2020-11-03 11:42:46 AM
