Lorenz DEEPMAX Z1, Operating Manual

Page: 19 / 20

O R E N Z
15. Maintenance/service
The LORENZ DEEPMAX Z1 is practically service free. The
electronics control box and the other components should
always be kept clean and dry. This is particularly important
for the plugs and sockets, which should never be stored
when being wet. The electronics control box is water and
dust protected but it should be avoided to immerse the unit
in water. All search coils available for the LORENZ DEEPMAX
Z1 are waterproof up to the connector. All the connectors
should be kept dry.
The LORENZ DEEPMAX Z1 is ruggedly designed. All neces-
sary electronic components are placed on two printed
circuit boards. The main circuit board is covered with a
special plastic to protect it from rapid temperature changes
and humidity.
Different components like the front panel, circuit boards and
connectors can easily be exchanged if necessary.
Guarantee
This Detector is guaranteed against defects in materials and
workmanship for two years within European Community
and one year outside the EC, with the exception of batteries
and accessories. The guarantee is not valid when disregar-
ding following
• Non-observation of our guidelines in the operating
instructions
• Use outside the described applications
• Alteration to or opening of the device
• Mechanical damage caused by media, liquids, natural
wear and tear
• Electric installation
• Overloading of the detecting equipment
All of the components can be cleaned from dust with a soft
cloth if necessary. In case of false signals or any kind of
unstable operation please check the capacity of the battery
the condition of the connectors and cables/ search coils
first.
In the case of any false functions or problems occurring with
your LORENZ DEEPMAX Z1 detector do contact your dealer
where you have purchased your detector first before you
contact us at:
Lorenz Detecting Systems GmbH & Co. KG
Röpkestrasse 12 · 30173 Hannover Germany
Telephone: +49 (0)5 11 55 106 70
Fax: +49 (0)5 11 55 106 71
eMail: mail@metaldetectors.de
Internet: www.metaldetectors.de
www.deepmax.com
16. LORENZ DEEPMAX Z1
equipment/accessories:
LORENZ DEEPMAX Z1 detector only (without coils)
• Plastic carrying case with foam padding
• LORENZ DEEPMAX Z1 electronics control box
• Adjustable shoulder and belt strap with detachable
rechargeable battery pack
• Fast charger with wide range AC-input (90-264V)
• Euro AC- adapter
• Operating manual (English/ German)
• Stereo headphones with four way connector
LORENZ DEEPMAX Z1 Detecting kit includes in addition
• 1m x 1m frame coil with carrying straps
• Carrying bag for 1m x 1m frame coil
• Telescopic S pole, consisting of three rods
• 35cm DD- coil
LORENZ DEEPMAX Z1 Data Logger Hardware/Software kit
• Golden Software SURFER single license
• GPS- Module
• USB adapter cable for data transfer
• USB-Stick with Lorenz Data Converter Software
This kit was made for use with the DEEPMAX Z1 built-in data
logger function. To generate colour maps an additional
computer with following system requirements would also
be necessary, but not included with this kit: Windows XP SP2
or higher; Vista; 7; (Trade Mark of Microsoft), 1GB RAM,
100MB free hard disk space, 1024x768 or higher monitor
resolution with a minimum 16-bit colour depth
17. Specifications weight/
dimensions:
Electronics control box: 120x122x85mm
Carrying case for LORENZ DEEPMAX Z1: 400x300x220mm
1m x 1m frame coil (collapsed): 1080x150x150mm
Extended S-rod length: 1550mm
Collapsed S-rod length: 1030mm
Disassembled S-rod length: 690mm
LORENZ DEEPMAX Z1 electronics control box:
approx. 1300 g
Shoulder and belt strap with mounted external battery
pack: approx. 3000 g
Carrying case with LORENZ DEEPMAX Z1 inside: approx.
7000 g
Telescopic S pole: approx. 600 g
26cm single coil: Weight approx. 500 g*
26cm double D coil: Weight approx. 600 g*
35cm single coil: Weight approx. 600 g*
35cm double D coil: Weight approx. 800g*
45cm single coil: Weight approx. 700 g*
1m x 1m frame coil with cable inside tubes: Weight approx.
2600 g*
Universal cable coil 8m perimeter (can be used for
0,7mx0,7m; 1mx1m; 2mx2m and compensated 1m x 2m
frame mounted search coil): Weight approx. 600g*
Universal cable coil 12m perimeter (can be used for 1mx1m;
1,5mx1,5m; 3mx3m frame mounted search coil): Weight
approx. 900g*
1mx1m double frame coil kit: Weight approx. 7300 g*
Y-Adaptor cable: Weight approx. 100 g*
*all weights taken with connecting cable and connector!
The coils ranging from 26cm to 45cm diameter need a
telescopic S pole for operation.
Electrical data:
Search-frequency with small/large search coils connected:
approx. 2000 / 1000 pulses per second
Audio metal response voltage controlled oscillator VCO and
volume/ threshold control: 0 - 4000 Hz
Power source: external rechargeable NiMH battery 12V/
9,5Ah (declared as dry battery)
Usage time: approx. 7 to 14 hours depending on tempera-
ture and connected coil
Battery charger: rapid charger with 90-264V AC/ 50-60Hz for
world-wide operation
Operating temperature: - 5°C to + 50°C
Detection depths: see chapter 11
Data logger:
six channel data acquisition, supported by GPS
Storage media: internal memory
Number of fields: 99
Sampling rate: 12 per second
Resolution: 24 bit
GPS Module:
Channels: 50 channels
Sensitivity -162 dBm
Frequency L1, 1575.42 MHz
C/A Code 1.023 MHz chip rate
Precisions: Position Horizontal 2.5m CEP, 2.0m SEP with SBAS
Date: WGS-84
Protocol: NMEA-0183 V3.01 GGA, GSA, GSV, RMC, VTG
Performance: Operating temperature: -20°C to +60°C
Dimensions: 65 x 45 x 22 mm
Search coils (interchangeable) electrostatic insulated/
shielded and waterproof up to the connector. The connec-
tors themselves are not waterproof!
Design and specifications subject to change without notice!
Disposal Notice
In accordance with directive 2002/96/EC of European
Parliament and the council of January 27, 2003 on Waste
Electrical and Electronic Equipment (WEEE), products
labeled with the symbol of a crossed waste bin must not be
disposed of with unsorted municipal waste. For this purpose
please check for certain collecting points for electronics
equipment.
19