Lorenz Messtechnik GmbH
Obere Schlossstrasse 127/129/131
73553 Alfdorf
Phone +49 7172 93730-0, Fax +49 7172 93730-22
Technical changes, errors and misprints excepted.
090215d_GM42
10/11
6.3 Standard Operation
EMC
Caution
: The device may not be exposed to higher EMC transients than determined by the
standard.
Cable
Caution
: Never disconnect the connectors by pulling the cables. Always separate the con-
nector at the plug, directly.
Storage
Store the device in dry and dust-free spaces only.
6.4 Maintenance and Cleaning
Warning
: Please disconnect the device from the power supply before cleaning!
Clean the housing with a soft and slightly moisturized cloth. Never use solvents, as they may damage
the front panel labeling and the display panel.
While cleaning, ensure that no liquids enter the device or the connections.
Preventive maintenance and inspection
Check the plug connections
Repair
Note
: The device does not contain any parts which must or can be serviced by the user.
Repairs may be carried out by Lorenz Messtechnik GmbH exclusively. If assuming that safe
operation of the device is no longer possible, it must be taken out of service and secured
against inadvertent operation, immediately. This applies in particular, if:
•
The device shows visible damage
•
The device is no longer functional
•
Parts of the device are loose
•
The connection lines show visible damage
