TABLE OF CONTENTS
E 3
The THL105 is a compact field mount thermostat for regulating heating cables and ribbons, allowing control of resistive
load up to 3.5 kilowatts. The digital regulation allows to combine precision and ease of use.
Temperature and setpoint are displayed on a large LCD display.
Technical specifications can be downloaded at:
http://www.loreme.fr/fichtech/THL105_eng.pdf
USER INTERFACE
Visualization
160°C out: off
Temperature and output relay state.
SET point:140°C
Setpoint.
The push buttons allow a direct adjustment of the setpoint. The
button allows you to increment the setpoint and the
button to decrement it. The setpoint is incremented or decremented in steps of 1 °C at the beginning. Holding pressed
the
or
button for more than 4 s will increment or decrement the setpoint in 10 °C steps.
Configuration
An advanced configuration is accessible via the 'Config' button. The user can thus configure the hysteresis and delay
parameters of the regulation.
The regulation works as follows:
- The load is energized when the temperature drops below the setpoint and after the configured delay time.
- The load is no longer supplied when the temperature goes above the threshold plus the hysteresis.
Device Presentation
Buttons
Terminals for PT100
LCD display
2 lines / 16 characters