TABLE OF CONTENTS
E 14
LOREME
12, rue des Potiers d'Etain - 57071 Metz
03.87.76.32.51 - Fax 03.87.76.32.52 - Email: [email protected] - Techni-
BUS100 system
The BUS100 is a modular system composed of one master (/CMTCP module. Module with Ethernet link) and slaves
modules (/BUS model without Ethernet link). All modules are reachable by the Ethernet link. Each module is accessible
via its own address range. The master module is always accessible in the address range of 0 to 999. The slaves module
(/BUS module) are reachable in an address range equal to
1000 x BUS address
. The address parameter is configur-
able by the front face of device and should be different for each BUS module connected as shown below.
Example of BUS:
Modu
le /C
MTC
P
Modu
le /B
US
BUS
addres
s =
1
Modu
le /B
US
BUS
addres
s =
2
Possible address range
from
0000
Range of measure
registers
(The length of this range
depends on the type of
device)
….
….
Reserved address for the
configuration
….
to
0999
Reserved address for a
device identification code
Possible address range
from
1000
Range of measure
registers
(The length of this range
depends on the type of
device)
….
….
Address reserved for the
configuration
….
to
1999
Reserved address for a
device identification code
Possible address range
from
2000
Range of measure
registers
(The length of this range
depends on the type of
device)
….
….
Address reserved for the
configuration
….
to
2999
Reserved address for a
device identification code
Reserved address for later use.
