2.
Lift the handle of the stroller up and then push forward. As a result, it will extend and lock automatically.
(Photo 3;4 )
1.
Folded stroller
Release the blocking mechanism.
UNFOLDING
10
5.
Always dry and air the stroller if it is not dry enough!
4.
When not in use, never place other objects in or on the stroller! This will damage it!
7.
Always clean the wheel axes and plastic elements after using the pram over sandy or dusty surfaces!
1.
To clean the metal parts, wipe with a moist and then dry towel until the stroller is all dry.
2.
To clean the plastic parts, use a towel, water and a soft detergent.
3.
To clean the textile parts, use a solution for cleaning tapestries.
6.
Run regular clean-ups over the wheel axes and the plastic elements.
8.
DO NOT LUBRICATE
the wheel axes or other movable parts of the stroller! Just clean them!
9.
Run regular checks for loose or damaged parts and if there are such, immediately replace them with new
ones!
MAINTENANCE AND CARE
PARTS
Picture 1
5.
Accessory bag
pcs
-1
.
1.
Metal frame of the stroller
- 1
pcs
.
3.
Shopping basket
- 1
pcs
.
7.
Transformable seat unit
- 1
pcs
.
8.
Front bar
pcs
- 1
.
12.
Adaptors
- 2
pcs
.
6.
Mattress / pad
pcs
- 1
.
4.
Front wheels
pcs
- 2
.
2.
Rear wheels
-
2
pcs
.
9.
Foot cover
pcs
- 1
.
10.
Canopy
- 1
pcs
.
11.
Children’s car seat
- 1 pcs.
WARNING!
This pushchair is designed to be used from baby’s birth. You shall use the most reclined position for
newborn babies. The newborn child is not able to sit and hold his/her head up unassisted.
WARNING
!
Do not let the child play with this product!
Therefore do not fix the backrest in sitting position for children under
6 months!
WARNING
!
Always use the restraint system!
WARNING
!
Check that the pram body or seat unit or car seat
attachment devices are correctly engaged before use
WARNING
!
This product is not suitable for running or skating
!
EN 1888 - 1:2018
ASSEMBLING
1.
Mount the front wheels by pressing them upward until they lock into place. (Photo 5) Check if they are
securely locked. To unmount them, press the console button and pull the wheel down. (Photo 6)
2.
Mount the rear wheels as shown in Photo 7. To unmount them, press the rear axle button and pull the wheel
all the way. (Photo 8)
3.
Attach the metal part under the seat for upholstery with the tick-tack buttons on the bottom of the seat.
Picture 9
(Photo 13)
5.
Mount the fingerboard for the child. (Photo 14) To remove the fingerboard, press the buttons placed on both
its sides and pull all the way. (Photo 15)
4.
Mount the stroller basket paying attention to the pincers being placed and fixed in the designated openings
in the frame. (Photo 10) A click will indicate that the basket has been secured. To unmount, press
simultaneously the buttons on both sides of the basket and pull upward. (Photo 11) The basket may be
mounted in the direction of the movement (Photo 12) or in the opposite direction of the movement of the
stroller.
6.
Install the both end tips of the canopy into the slots at both sides of the basket ( Picture 16) and zip the
canopy ( Picture 17 )
