29
Note!
• Programme setting for testing in accordance with applicable standard En60456.
• When using the test programmes, wash the specified load using the maximum spin
speed.
• The actual parameters will depend on how the appliance is used,and maybe
different with the parameters in above mentioned table.
• The household washing machine is equipped with power management system. The
duration of the left-on mode time is less than 10 minutes.
• The noise emissions during washing/spinning for the standard washing cycle at full
load.
• Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be
washable at 40 °C or 60 °C, together in the same cycle, and this programme is used
to assess the compliance with the EU eco design legislation
• The most efficient programmes in terms of energy consumption are generally those
that perform at lower temperatures and longer duration
• Loading the household washing machine or the household washer-dryer up to
the capacity indicated by the manufacturer for the respective programmes will
contribute to energy and water savings
• Use detergents intended for particular type of laundry
• Noise and remaining moisture content are influenced by the spinning speed: the
higher the spinning speed in the spinning phase, the higher the noise and the lower
the remaining moisture content
Authorized service center contact information can be found at www.lord.eu.
Spare parts can also be ordered at the authorized service center.
According to the respective ecodesign regulation, spare parts can be obtained from the
authorized service center for at least 10 years since the last appliance model item has
been placed on the market of the European Economic Area.
Please have the identification mark of the model and the serial number at hand before
contacting the authorized service center.
The identification mark of the model and the serial number of the product can be
found at the rating label placed on the outside surface at the rear of the appliance.
We recommend that you write the data from the production label into this manual
before you place the appliance to the place where it will be operated to facilitate
finding the data later.
Unprofessional repairs and self-repairs are dangerous to health, can damage the
appliance and may void the warranty.
