LORD 6253-4220 User Manual Download Page 13

Page: 13 / 75

3DM

-GX5-25

User Manual

3.3

Software Interface

The MIP Monitor software includes a main window with system information and menus, a device

settings window, and several data monitoring windows.

The main window provides an overview of connected devices. Devices are selected by clicking on

them. A device menu is available by right-clicking on the device name and includes the most used items

from the header row menus. The header row menu includes selections for data sampling, recording,

device settings, opening windows, selecting which open window to view, and advanced features such

as selecting the communications mode. The icon toolbar includes buttons for Help Menu access,

where all related documentation is available in Web Resources, device refresh, and data sampling and

recording.

Figure 6 - Main Window Display

3.3.1

Interactive Help Menu

MIP Monitor also includes a mouse-over feature that provides explanations of the information and

settings. This feature is enabled by selecting the question mark icon or Help button in any window.

Figure 7 - Context Sensitive Help Menu

Summary of Contents for 6253-4220












































































Search results

Summary of Contents for 6253-4220

Reviews:

Brands by name

Popular brands

LORD 6253-4220, User Manual

Search results

Summary of Contents for 6253-4220

Reviews:

Brands by name

Popular brands