Lord MicroStrain Sensing SG-Link-200, User Manual

Page: 23 / 52

SG-Link®-200
User Manual
23
5. Wireless Sensor Sampling Configuration
5.1 Start Collecting Data
There are several ways to collect data from the SG-Link-200, including from a single node, a network
of nodes, or restarting the last used sampling mode
l
Single node - From Devices, select Node address > Sample > Apply and Start Network
to begin collecting data from a single wireless sensor.
Figure 15 - Single Node Sampling
l
Network of Nodes - From Devices, select > Base Station > Sampling Network > Nodes to
be sampled > Apply and Start Network to start collecting data from a network of wireless
sensors.
Figure 16 - Network of Nodes Sampling