WSDA
®
-Base-104
®
USB Base Station
User Manual
System Operation Overview
17
Figure 9 - Sample Settings Menu
3.7
Data Acquisition
NOTE
Once sampling has started it will continue as configured without the need to
leave Node Commander
®
open. However, if the node is powered off and is not
configured to sample on boot- up, data acquisition will end and must be
restarted in Node Commander
®
. To resume viewing data after the sampling
window has been closed, use Monitor Mode (found in the gateway menu).
NOTE
Touching sensors or charging the node battery while acquiring data may induce
noise on sensitive sensor signals and is not recommended.
When data acquisition is started, each of the sampling modes has different menu options and
views. Some open a settings menu before data acquisition begins and may include a data list
view and/or a graph view. The following is an example of Synchronized Sampling (
).For information on other sampling menus refer to the node user
manual or the LORD MicroStrain
®
website (
).
