3DM
®
-GX5-10
User Manual
7.1.1
Packet Builder
To expedite program development, a packet builder tool is included in the MIP Monitor software.
The packet builder allows users to send multiple packets to the 3DM-GX5-10 and view the resulting
reply data.
Applicable protocol structure and design is described in the 3DM-GX5-10 LORD Sensing MIP Data
Communications Protocol (DCP) Manual DCP Manual . For additional help, contact Technical
Support (
see Technical Support on page 39
).
To use the packet builder select Advanced > Packet Builder from the MIP Monitor main window (
). The sensor must be in the Standard communications mode to use this
feature.
Figure 22 -Packet Builder
7.2
Sensor Wiring
Only use power supplies within the operating range of the
sensor, or permanent sensor damage or personal injury could
result. There are two input power pins available, each with
different voltage ranges. Connect only one at a time. Observe
connection polarity.
Sensor power and serial communications cables are available from LORD Sensing and come with the
sensor connectivity kits. These cables will have the on one end (to connect to the sensor) and either a
standard DB9 on the other end (for RS232 communication) or a USB connector (for USB
communications). Alternately, the micro-DB9 can be purchased from LORD Sensing with flying leads
31
