8
8.Temperature Calibration
if temperature on heater is higher than
circuit board shows,pls raise the Pb
value.
Example:
Heater temperature:190C
Circuit board temperature:185C
Pls set Pb Value at ( +5 )
If temperature on heater is lower than
circuit board shows,pls reduce the Pb
value.
Example:
Heater temperature:185C
Circuit board temperature:190C
Pls set Pb Value at ( -5 )
8.1
Press “set” button for 4 seconds to
enter into second level menu.Display
as below.(see figure 8.1)
8.2 Press
“set” button to select “Pb” mode
(See figure 8.2)
8.3 press
“up” and “down” button to make
temperature calibration.
8.4
Press “set” button 4 seconds to quit.
8.1
8.2
Summary of Contents for GS-205B Plus
Page 3: ...3 Machine View ...
Page 4: ...4 Control Panel Guide ...
Page 12: ...12 Electrical Schematic ...
