12
|
Instructions for use
| Nemo Shower-toilet chair
Option:
Comfort leg supports
The comfort leg supports provide the legs with additional support . The comfort leg
supports can be adjusted in length as well as according to the sitting angle . The angle of
the leg supports can be adjusted to 4 positions
(See figures 5 to 8).
To change the
seating angle, you have to release the locking pin . When you have determined the
correct position, lock the sitting angle of the comfort once again
(See figure 9)
.
Make sure that the locking pin slips in well into one of the 4 holes.
To adjust the length of the leg supports, you have to release the locking pin underneath
by loosen it a bit
(See figure 9)
. Choose the right length for the leg support and tighten
the locking pin again .
Make sure that both the sitting angle and the length of the leg supports are
locked properly as soon as they have to support a load.
Always place these parts on the seat as soon as you finish using them. This
prevents you from looking for the parts.
30°
48°
83°
65°
Figure 5 to 8 Adjustable seating angle .
Figure 9 Locking pins .
Setting the angle of the locking pin
Setting the length of the locking pin