Optional
Equipment
(for qualified installers only)
51
© Travis Industries
4091120
100-01239_000
Installation
WARNING
:
Make sure power to the stove has been shut off prior to installation.
NOTE
:
Refer to the wiring diagram on page 50 while making wiring harness connections.
1
Loosen the bottom panel attachment screws (there are two on each side see Figure 1). Slide the
bottom panel back and place it below the stove (see Figure 2). This allows for access to the controls
under the stove. NOTE: The fireplace controller is secured to the panel with Velcro. It may be
removed to allow the panel to rest on the ground.
Figure 1
Figure 2
2
Remove the four screws holding the control panel to the front of the stove (see Figure 3). Carefully
remove the control panel, making sure you do not disconnect any wiring (see Figure 4).
Figure 3
Figure 4