26
Finalizing
the
Installation
© Travis Industries
10/2/17 - 1454
Berkshire MV
6
One twig is included for the front of the firebox. Place it at the front of the firebox as shown below
(
do not place it over any burner holes
).
Rock Wool Placement
The included rock wool is placed on top of the burner to enhance the glow from the burner.
The rock
wool works best when it is applied in a very thin, porous layer.
The best method for applying the rock
wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and forefinger.
Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the entire bag of
rockwool. Use only a small amount and save the remainder. Over-use of rockwool will diminish the glow
and may cause sooting or other adverse conditions.
Ember Placement
Place a layer of embers along the edges of
the burner, on top of rivets, and along the
edges to enhance the aesthetics of the
firebox. Do not place embers over any
burner holes. See the photo to the right.
