Operation
21
Travis Industries
4041220
9 3 5 0 8 1 2 3
Safety Notice
Read this entire manual (especially the “Safety Precautions” on pages 2 and 3)
before using this stove. Failure to follow the instructions may result in property
damage, bodily injury, or even death.
Location of Controls
ON/OFF
Switch
The on/off switch and optional blower
control are located on the back of the
heater.
ON
OFF
Optional
Blower
Control
The Pilot Flame
can be found below
the back log.
Gas Controls
Gas Control Knob
Flame Adjust Knob
Pilot Igniter
On/Off Switch
This control is used to turn the main burner on and off.
Gas Control Knob
This knob is used to control gas to the heater and for starting the pilot.
There are three positions, ON, OFF, & PILOT. The pointer directly below
the knob indicates the position this knob is in.
Flame Adjust Knob
This knob controls the flame height from low (“LO”) to high (“HI”). The
pointer to the upper left of the knob points to the position this knob is in.
Pilot Igniter
The pilot igniter is used only to start the pilot. When pressed, it sends an
electrical charge to the pilot assembly. This creates a blue spark directly
next to the pilot, igniting the pilot flame.
Blower Knob
This knob controls the speed of the internal convection blower that
pushes the heated air into the room.
?
If using a remote control or thermostat, the On/Off Switch must be left “ON”. Turning the On/Off
Switch “OFF” will keep the heater off always.
