6
5.
RELEASE PRESSURE AFTER OPERATION.
Release pressure by twisting pump handle (37) clock-
wise while holding the handle in the open position, then
move the handle down into the closed position.
WARNING
: Keep fingers clear fr om
the dies and ram (14) during operation
.
Use the gauge that is provided to check the accuracy of
the after swage dimension of the sleeve. Properly
swaged sleeves should pass
easily into the slot that corre-
sponds to the sleeve sizes.
Sleeves that do not fit properly
into the gauge slot after swag-
ing is an indication that the
tool may be out of adjustment.
Properly swaged sleeve.
OPERATING INSTRUCTIONS
(Continuation)
